Electron Pedia

Troubleshooting a Car Wont Start Just Clicks

Identifying and resolving a Car wont start just clicks can be a frustrating experience for any vehicle owner. This article aims to provide you with comprehensive troubleshooting steps to address this issue effectively. By understanding the potential causes and taking the necessary actions, you can potentially resolve the problem without having to rely on professional assistance.

Dead Battery


A common reason for a car to click when starting is a dead or discharged battery. Look out for dim headlights, weak electrical functions, and the repetitive clicking sound when attempting to start the car.

Troubleshooting Steps

  1. Check battery connections: Ensure the battery terminals are clean, tight, and free of corrosion. Clean the terminals and tighten loose connections if necessary.
  2. Jump-start the car: If the battery is weak, you can try jump-starting the vehicle following proper procedures. Be cautious when handling batteries due to associated hazards.
  3. Test the battery: Use a multimeter to measure the battery’s voltage. A healthy battery should read around 12.6 volts. If the voltage is significantly lower, it may be time for a replacement.

Starter Motor Issues


Another culprit for a Car wont start just clicks noise during starting is a faulty starter motor. Keep an ear out for grinding noises or no response at all when turning the ignition.

Troubleshooting Steps

  1. Check for loose connections: Inspect the wires connected to the starter motor. Ensure they are securely fastened and free from corrosion.
  2. Test the starter motor: With the help of a voltmeter, measure the voltage at the starter solenoid while someone turns the ignition. If voltage is present but the starter motor fails to engage, it might be time for a replacement.

Faulty Starter Solenoid


The starter solenoid acts as a bridge between the battery and the starter motor. Failure of the solenoid can result in a clicking noise during starting attempts.

Troubleshooting Steps

  1. Test the solenoid: Use a multimeter to measure the voltage at the solenoid while someone turns the ignition key. If there is no voltage or a significant drop in voltage, the solenoid may be faulty.
  2. Replace the solenoid: If the solenoid is confirmed as the issue, it is recommended to replace it. Refer to your vehicle’s manual or seek professional assistance for the specific replacement procedure.

Dealing with a car that only clicks when you try to start it can be frustrating, but with the help of these troubleshooting steps, you can potentially identify and resolve the issue on your own. This article discussed potential causes such as a dead battery, faulty starter motor, and a malfunctioning starter solenoid. By following the outlined steps, you can diagnose and even fix the problem, saving both time and money. However, if the issue persists, it is advisable to seek professional assistance for proper diagnosis and repair.

Regular maintenance and periodic inspections of your car’s electrical system can help prevent such issues from occurring. Checking the battery, starter motor, and connections regularly can significantly contribute to the smooth starting of your vehicle.