Accept as true with the primary footage you spot—assuming they lack a smaller case, or a small kid, for scale—and the HAF 700 looks as if simply every other flashy PC case. You then see it in particular person. Your first clue is that the ones aren’t 120mm or 140mm lovers at the entrance, however dual saucer-size 200mm. Within the $299.99 HAF 700, we’re taking a look at a case that’s kind of a 3rd greater in each and every path in comparison to an peculiar mid-tower. (No marvel Cooler Grasp subtitles it “The Berserker”!) This chassis is all about most radiator and garage fortify, in an afternoon when the SSD has been diminished to M.2 gumstick layout and few other people run multiple video card. In case you are searching for a maximum-capacity beast, although, and top and footprint are not problems, it is a moderately priced and really succesful monster.
Would not have the dimensions down but? Take, as an example, the front-panel port lineup, which is a secondary clue to the XXL length. The HAF 700 has 4 USB Kind-A ports and a USB Kind-C; those technically qualify as USB 3.2 Gen 1 and USB 3.2 Gen 2. And but, a whopping 5 entrance USB ports is the least berserk factor about this high-end case. Reset and tool buttons, plus microphone and headphone jacks, are discovered at the different aspect of the higher 200mm consumption fan.
(Credit score: Thomas Soderstrom)
(Credit score: Thomas Soderstrom)
Turning the HAF 700 round offers us extra standpoint: The explanation that it doesn’t seem extremely deep within the entrance/left indirect photograph is that its motherboard tray is spaced a couple of inches from the left panel. Beneath, we will be able to already see the power-supply mount in the back of the motherboard tray, and as small as that opening seems to be, it in fact has the normal PS2-pattern utilized by full-size ATX persistent gadgets.
(Credit score: Thomas Soderstrom)
Sufficiently big for a 13-inch-deep E-ATX or SSI-EEB motherboard, the HAF 700 has enough room below its backside edge to carry a kind of previous XL-ATX behemoth motherboards (from again within the four-way SLI days), at the side of an 8th PCI Specific slot place simply when you’d like to take a look at, for no matter difficult to understand reason why, mounting a double-slot card on the backside of a typical ATX/EATX mobo. The 2 200mm consumption lovers stand prominently on a entrance panel that seems to be drilled for a couple of different (unspecified) unusual sizes, and the 2 120mm exhaust lovers are screwed to slots that let them to be reduced to transparent—get this—a 240mm-class (dual 120mm) liquid cooling radiator.
(Credit score: Thomas Soderstrom)
The ground includes a triple 120mm or 140mm fan mount over a slide-out mud clear out and sufficient room to suit so-called 360mm and 420mm radiators of any sensible period. The one integrated 120mm fan down here’s the one one within the device that isn’t already attached, and that’s most likely as a result of Cooler Grasp feels that many house owners will probably be tossing this one to as an alternative set up their very own matching set.
(Credit score: Thomas Soderstrom)
The decrease radiator mount is detachable by way of a unmarried latch. Strangely, it’s designed to tilt roughly 15 levels towards the glass aspect, if desired. Since we will be able to’t bring to mind any reason why to tilt the consumption lovers clear of the consumption clear out, we’ll believe this one of the crucial HAF 700’s quirkiest options.
(Credit score: Thomas Soderstrom)
Much more odd is that the highest panel options area for two (sure, two) 360mm-class radiators by way of six 120mm lovers. With 500mm of period to be had, it’s the width that limits customers of 140mm lovers to a unmarried 420mm-class radiator. The 2 rows of 120mm lovers also are too a long way aside to mount double-row (comparable to 240mm by means of 240mm sq.) radiators.
(Credit score: Thomas Soderstrom)
For the reason that motherboard tray is ready inward however the most sensible panel radiator mounts aren’t, we discover a 106mm corner above the motherboard tray. That’s sufficient room for an Alphacool NexXxoS Monstra(Opens in a brand new window) 360mm by means of 80mm radiator, plus 25mm lovers at the extra restrictive appropriate aspect! For the reason that we love to depart greater than 1mm of area for airflow (amongst different issues), a couple of 60mm-thick triple-fan radiators and two rows of 38mm-thick 120mm lovers sounds way more affordable a most. Oh, and for individuals who like fan sandwiches, 25mm plus 45mm plus 25mm continues to be 11mm lower than 106mm.
(Credit score: Thomas Soderstrom)
Then there is the PCI Specific card mounting. Card latches have been a large deal 20 years in the past, with dozens of horrible designs polluting the marketplace some of the few in fact passing muster. The HAF 700 brings them again in the easiest way imaginable. Its absolutely practical card-securing software opens simply from the out of doors and closes securely over locator studs. The locator studs stay playing cards from slipping out of place, and can also be changed with screws when screws are required. We did have some quibbles, although, amongst them the truth that the slot slightly opened large sufficient to permit our card’s decrease bracket tabs to slip previous our motherboard’s beauty plastic overlaying, and that changing its studs with screws will require screwdrivers with lengthy, skinny shanks.
(Credit score: Thomas Soderstrom)
Doing away with the proper aspect finds consumption mud filters for the flexibility delivery and non-compulsory side-mounted radiator/lovers. Connected with a strip of magnets across the outer edge, there’s sadly not anything to find those clear out sheets inside the flat aircraft that’s the metal right-side panel. Customers should align those visually, and take away the aspect panel to re-align each time mishandling reasons those to shift.
(Credit score: Thomas Soderstrom)
Appearing what’s in the back of the proper aspect panel calls for the removing of but every other, smaller panel. The grey factor on the most sensible of that smaller panel is a quarter-turn latch.
(Credit score: Thomas Soderstrom)
That interior panel is drilled to fortify two drives within the person’s selection of 2.5-inch and three.5-inch shape components.
(Credit score: Thomas Soderstrom)
You notice, within the symbol beneath, in the back of the outer two-drive trays are 3 single-drive trays (left) and a four-drive cage (appropriate) that tilts out for simple removing. At the back of the 3 unmarried pressure trays is a fan mount with slots that have compatibility as much as 4 120mm or 3 140mm lovers, plus radiators that fit both of the ones choices. An ARGB controller and a fan hub are noticed sooner than the pressure cage, whilst the flexibility delivery bay is noticed beneath it.
(Credit score: Thomas Soderstrom)
The ARGB controller has two inputs and 3 outputs: The lower-left micro USB connector is going to an inner USB 2.0 header cable, the 5V power-supply connector is going to a SATA-style persistent lead, and the “ARGB1” header is going to a fan hub above it. We zoomed in with hopes that any individual studying this is able to determine the controller.
(Credit score: Thomas Soderstrom)
Powered one by one by means of a 2nd SATA-style lead cable, the fan hub contains seven PWM and 5 ARGB headers. Together with the 2 open headers at the ARGB controller, the HAF 700 supplies persistent and regulate for seven ARGB lovers.
(Credit score: Thomas Soderstrom)
Construction With the HAF 700
Contents
Despite the fact that the HAF 700 helps full-size persistent provides greater than 200mm deep, it is going to take a lot smaller, extra mortal fashions. (FSP provided us with a unit that matches each and every form of case we check and nonetheless has sufficient persistent to fortify any more or less {hardware} we’d throw on it; lengthy cables and a PS2 adapter plate are key to its set up flexibility.) In the meantime, Corsair’s iCUE H100i RGB Professional XT helps to keep our methods lit…regardless of how flashy the case. That is our ordinary check cooler, although in fact it is undersize for this category of chassis; you purchase a case like this to mount giant radiators. Here’s a abstract of our check config…
The very first thing we wish to do is screw within the motherboard and CPU cooler: The HAF 700’s set up package is a complete ironmongery store, coming in a plastic organizer tray. It contains 3 further standoffs to fortify 13-inch-deep motherboards, 12 fan screws, two units of 20 threaded pins for push-mounting 2.5-inch drives and three.5-inch drives, 23 hex/Phillips #2 combo head screws in #6-32 thread, 16 M3 screws for mounting 2.5-inch drives to trays that don’t fortify push-in set up, 4 longer #6-32 screws for different drive-mounting wishes, a cleansing material, 3 Velcro-brand (consistent with Cooler Grasp) cable straps, and 10 cable ties.
(Credit score: Thomas Soderstrom)
Subsequent come the cables: Cooler Grasp provisioned the HAF 700 with an inventive clip that helps to keep its persistent button and LED leads grouped in combination within the now-standard Intel layout, and can also be slid off for the ends up in have compatibility different forums. Additionally noticed here’s the USB 3.2 Gen 2 cable (categorized USB 3.1, as it’s each), two USB 3.2 Gen 1 cables which are helpfully categorized with each correct and acquainted requirements, a USB 2.0 cable for the ARGB controller, and the standard HD Audio for front-panel connections. Now not proven are the 2 SATA-type pressure persistent leads that one by one persistent the ARGB controller and the fan hub.
(Credit score: Thomas Soderstrom)
After connecting the ones cables to the mainboard, we’re in a position so as to add our persistent delivery cables. That is how the HAF 700’s inside seems to be when provided simplest with common ATX-size portions. Its large 480mm-class aspect radiator mount is obviously visual a number of inches ahead of the motherboard.
(Credit score: Thomas Soderstrom)
And right here’s the way it seems to be all lit up. This can be a large case, now not tiny elements, thoughts you: This chassis dwarfs absolutely anything chances are you’ll installed it from a “standard”-size mid-tower.
(Credit score: Thomas Soderstrom)
Benchmark Effects
The HAF 700’s baseline CPU cooling efficiency finishes on par with the highest 3 instances in our comparability for with regards to a four-way tie. After all, these kinds of instances are designed to fortify a a long way greater cooling device than what’s integrated in our baseline trying out configuration.
(Credit score: Thomas Soderstrom)
Our device is configured to make use of the radiator lovers for voltage-regulator cooling, however the HAF 700 is designed to carry one thing of a little bit grander scale. That’s most probably the best reason why that it fell to fourth position in our voltage-regulator measurements.
(Credit score: Thomas Soderstrom)
Then we checked out GPU cooling. HAF 700 is tied for first with the NZXT H7 Glide with regards to offering cooling air to our GPU.
(Credit score: Thomas Soderstrom)
With not anything greater than a suite of front-panel fan blades to stay the noise of our graphics card within the HAF 700, the truth that its huge length places that noise supply at a better distance from our meter is the one cause of its mid-pack sound-pressure stage. Measuring from the glass aspect gave us decrease numbers than from the metal aspect.
(Credit score: Thomas Soderstrom)
The Verdict: A Very Giant Deal, of Varieties, for the Proper Builder
Cooler Grasp’s HAF 700 is large, however is it an important addition to the PC-case box? With area for a quad-fan radiator plus 3 triple-fan ones, it’s for sure going to garner nice hobby from some participants of the overclocking group. Nonetheless, a lot of its {hardware} lacks the polish of the case we’d believe its closest contemporary competitor, the Corsair iCUE 5000T RGB, although it does have a super-slick card-latching mechanism.
However case appearances are not anything if now not subjective, and various other people will favor the vintage mecha-look of the HAF 700. Additionally, the HAF 700 is 25% less expensive than the 5000T, and large sufficient to fortify an additional radiator on most sensible…and at the backside…and even the again. It is a chassis for the cooling 1%, and we expect that makes it a little bit, neatly—berserker? extra berserk?—than its festival. We are satisfied it exists, however we are nonetheless running on justifying that 2nd radiator in our PC, by no means thoughts a 3rd or fourth.
Execs
Cons
The Backside Line
A big mega-case for probably the most excessive builds, Cooler Grasp’s HAF 700 beats its closest rival in sheer amount of fan and radiator fortify, whilst additionally being more cost effective. That mentioned, it is sufficiently big to be a non-starter for all however probably the most motivated and cooling-stocked.
Like What You might be Studying?
Join Lab File to get the newest opinions and most sensible product recommendation delivered appropriate in your inbox.
This text might comprise promoting, offers, or associate hyperlinks. Subscribing to a e-newsletter signifies your consent to our Phrases of Use and Privateness Coverage. You might unsubscribe from the newsletters at any time.
